EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is actually a really efficient solar controller made for off-grid solar techniques. Dependant on multiphase synchronous rectification technologies, it assures optimized Strength conversion and process security for a wide range of photovoltaic (PV) programs.
Important Functions of your EPEVER Tracer AN Collection Controller
The Tracer AN sequence utilizes EPEVER Photo voltaic Demand Controller technologies for excellent photo voltaic Strength harvesting. Critical options involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Sophisticated MPPT Algorithm with >99% performance.
Twin-Phase Charging for Increased battery lifestyle.
LCD Exhibit with authentic-time facts checking.
Numerous Load Handle Modes like guide and timer.
Thorough Electronic Protections in opposition to overcharging, about-discharging, shorter circuits, and reverse polarity.
Move-by-Action Information to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all elements are bundled: Tracer AN unit, temperature sensor, interaction cables, and person guide.
Confirm the design quantity and voltage ratings match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a perfectly-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller using the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Normally follow proper protection protocols and make sure the program is powered off in advance of connecting parts.
Stage one: Hook up the battery terminals for the cost controller (positive to optimistic, unfavorable to detrimental).
Phase 2: Connect the photo voltaic panel array towards the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Stage four: Double-Test all connections for More info polarity and tightness.
four. Configuring the Controller Configurations
Electricity within the controller by connecting the battery initial.
Utilize the Liquid crystal display Screen to navigate the options menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
5. Monitoring and Details Logging
The Tracer AN Sequence supports genuine-time monitoring utilizing the MT50 remote meter.
Knowledge may be logged by using the RS485 conversation port utilizing program for example Solar Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Concerns
Issue 1: No Power Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Protection
Verify the photo voltaic array’s voltage score.
Regulate system parameters if vital.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Efficiency: Lowered Electrical power losses in the course of conversion.
Increased Reliability: Steady overall performance less than variable masses.
Longer Battery Lifetime: Consistent and correct charging profiles.
Summary
The EPEVER Solar Demand Controller with multiphase synchronous rectification engineering is definitely an Fantastic choice for optimizing solar power technology and extending battery existence. By next the above set up information, users can make certain highest performance and program longevity.